# Perforce P4V Client Installation Guide

## Follow these steps to install and configure the Perforce Helix Visual Client (P4V).

## !! IMPORTANT !!

You can refer to [this playlist](https://youtube.com/playlist?list=PLH3pq2J85xsPYn71_yzzsZQKvalTW-duE\&si=w-TugLhYBSRXIbd-) to **use** the client properly.

### Step 1: Download the Perforce Client

Download the P4V client from the official Perforce website using the following link:\
[Perforce Helix Visual Client - P4V](https://www.perforce.com/downloads/helix-visual-client-p4v)

<figure><img src="https://3110321133-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZGepexJQW5WNsjwBi3Zz%2Fuploads%2Fgit-blob-bab75847fc6aecd640f4cba275a993e2e1926966%2Fimage%20(16).png?alt=media" alt=""><figcaption></figcaption></figure>

### Step 2: Install the P4V Client

1. Run the installer you downloaded and follow the installation prompts.
2. When prompted for the server connection details, use the following:
   * **Server**: `ssl:146.59.32.118:1667` (replace `perforce:1666` with this)
   * **Username**: Use the username that was sent to you on Discord

<figure><img src="https://3110321133-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZGepexJQW5WNsjwBi3Zz%2Fuploads%2Fgit-blob-d8a62c64814fe4cf679dd0a84c0728a6b13c80cb%2Fimage%20(17).png?alt=media" alt=""><figcaption></figcaption></figure>

### Step 3: Complete the Installation

* Finish the installation and launch the P4V program.

### Step 4: Logging into Perforce

1. When P4V starts, it will prompt you for login details:
   * **Server**: Already set to `ssl:146.59.32.118:1667`.
   * **Username**: Enter the username provided to you on Discord.
   * **Password**: Use the password you received on Discord.
2. You may be asked to accept a server fingerprint. If prompted:
   * Accept the fingerprint.
   * Enter your password when asked.

<figure><img src="https://3110321133-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZGepexJQW5WNsjwBi3Zz%2Fuploads%2Fgit-blob-6e96a51e1e81afc830391f4d8c4efbc708921d21%2Fimage%20(18).png?alt=media" alt=""><figcaption></figcaption></figure>

### Step 5: Verification

Once logged in, you should be able to see the Perforce workspace. This means you have successfully installed and configured the P4V client!

<figure><img src="https://3110321133-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZGepexJQW5WNsjwBi3Zz%2Fuploads%2Fgit-blob-fb290aeaf01ae7bf42e4817a0eaa1bcd1fbf6636%2Fimage%20(19).png?alt=media" alt=""><figcaption></figcaption></figure>

You're now ready to start using Perforce with your project.
